crwdns2915892:0crwdne2915892:0
This guide helps you to replace your speakers on your HP laptop using only a screwdriver, tweezers, and the replacement part. The entire process is fairly quick and easy, and with a bit of care, it can be completed safely at home.
Caution: Anytime you are working with batteries or power, be sure to take care around the electricity and always unplug the battery before you attempt to replace the port.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips #0 screwdriver to remove all 6.7 mm screws from the bottom cover.
-
Carefully take the bottom cover off.
-
-
-
Before fully removing the top cover, locate the cable that connects the audio controls.
-
Once located, lift the small black flap and carefully pull the cable out.
-
-
-
-
Remove the large cable connecting the battery to the main board
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Locate the cable for the speakers and unplug, as shown.
-
-
-
Use a Phillips #0 screwdriver to remove the four 5.8 mm screws from the speakers.
-
-
-
Lift each speaker out of the laptop.
-
Carefully remove each speaker.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.