crwdns2915892:0crwdne2915892:0
Components below the laptop need to be removed before you can detach the keyboard. This is a guide to remove your laptop's keyboard.
crwdns2942213:0crwdne2942213:0
-
-
Flip the computer so the bottom is facing up with the battery away from you.
-
-
-
Slide the battery switch to the left until the battery unlatches from the base of the laptop.
-
-
-
Lift the battery from its compartment away from the laptop.
-
-
-
Loosen the two 5.7 mm screws on the bottom panel using a PH00 screwdriver.
-
-
-
-
Use the metal spudger all around the panel to pop it up from the base.
-
-
-
With your hands, lift the panel completely off the base of the laptop.
-
-
-
Using a PH 00 screwdriver, remove the screw located next to the wireless card.
-
-
-
Insert a plastic spudger or similar pry tool, beneath the keyboard, near the "insert" key, and pop the keyboard up from the laptop.
-
Starting at the opening you just created, run your fingers around the outside of the keyboard separating it from the rest of the computer.
-
-
-
Slightly angle the keyboard back so the ribbon connector underneath it is visible.
-
Remove the ribbon cable by using your fingers to pull up and away from the connector.
-
-
-
With the ribbon cable detached, you can now completely remove the keyboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:09crwdne2935229:0