crwdns2915892:0crwdne2915892:0
This guide will go through the steps to replace the screen if it is not displaying anything or the display is distorted.
crwdns2942213:0crwdne2942213:0
-
-
Unplug laptop from adapter and all other devices.
-
-
-
Flip the laptop over with battery facing you.
-
-
-
Slide the battery lock on the right side open.
-
Slide the Battery release latch on the left side.
-
-
-
Remove the two 6.5mm Phillips #1 keyboard screws from bottom of laptop.
-
-
-
Push screwdriver through screw hole top pop the keyboard.
-
-
-
-
Remove keyboard wire by popping latch under blue plastic
-
-
-
Using the spudger to lift up on the white tabs
-
Pull horizontally on the blue ribbon to disconnect the cables
-
-
-
Remove the five 5.5mm Phillips #1 screws from the case
-
-
-
Remove eight 6.5mm Phillips #1 screws from the back cover
-
-
-
Starting at a top corner, use the pry tool to split the case.
-
Slowly work around the case, pulling up gently to release the clips.
-
-
-
Remove the four 5.5mm Phillips #1 screws attaching the screen.
-
-
-
Remove the two 3.5mm Phillips #1 screws from the bottom of the screen.
-
-
-
Lay the screen face down on a surface where it ill not scratch
-
-
-
Lift up plastic over latch for the screen.
-
Pull the connector away from the screen to disconnect it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.