crwdns2942213:0crwdne2942213:0
-
-
Flip the laptop over, showing the backplate face up
-
-
-
Use your #1 Phillips-head screwdriver to remove all the 8 mm screws
-
-
-
After removing all the 8 mm screws, start to pry open the optical drive using your finders or a wedge.
-
-
-
-
Pull out the battery by positioning the switch with the lock symbol on unlock and pushing the switch with the battery towards the center of the laptop.
-
-
-
Use an opening pick or wedge to start to pry open the laptop keyboard cover.
-
Follow along the perimeter and separate the cover from the laptop.
-
-
-
Carefully remove the keyboard assembly.
-
-
-
Locate the I/O ports, and remove the bottom most ribbon cable.
-
-
-
Locate and remove the screw holding the I/O board in.
-
Once the screw has been removed lift the I/O board straight up and out of the case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0