crwdns2942213:0crwdne2942213:0
-
-
Switch the first lock, with the padlock icon, to the open position.
-
Then hold the second lock with the battery icon to the open position, while sliding out the battery pack.
-
-
-
Begin by laying the laptop on its backside with the bottom of the laptop facing you.
-
-
-
There will be 11, 2.5x3.0mm Philips head screws that you will need to locate.
-
Continue by unscrewing all of them using a 0 Phillips screwdriver.
-
-
-
-
Take off the back panel by removing the 4.0x4.7mm Philips head screw.
-
Then using the opening tool, work around the edges to pull off the back panel.
-
-
-
Now flip the computer right side up and open up the laptop.
-
You should be facing the screen and keyboard.
-
-
-
Now using the opening tool remove the front panel from the back panel.
-
It should start to pop off, you will have to do this step around the entire computer.
-
-
-
Once you have popped off the panel it should simply be able to lift off of the laptop.
-
Keep in mind that the keyboard is still connected to the motherboard. Simply lay the keyboard on top of the screen while you are completing future guides.
-
You can replace the front panel now.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
University of North Texas, Team S1-G2, Thompson Fall 2017 crwdns2935289:0University of North Texas, Team S1-G2, Thompson Fall 2017crwdne2935289:0
UNT-THOMPSON-F17S1G2
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
