crwdns2915892:0crwdne2915892:0
Unplug your device from any power source and turn off your laptop before beginning.
crwdns2942213:0crwdne2942213:0
-
-
Use the spudger to pry off the two rubber feet near the hinge of the laptop. This will reveal two hidden 9mm screws.
-
You must remove eleven screws.
-
Four 9mm screws with the PH0 screwdriver.
-
Seven 6mm screws with the PH0 screwdriver.
-
-
-
Use the spudger to pry the corners of the laptop near the display hinges.
-
Pry around the seam of the laptop with the plastic opening tool until the backing begins to pull apart.
-
-
-
Use the plastic opening tool to lift the white tab up at the connection.
-
Pull the cable outwards.
-
-
-
-
Remove the four 6mm screws from the battery with the PH0 screwdriver.
-
-
-
Use the spudger to pry up the blue/white speaker wires that are routed beside the battery.
-
-
-
Remove the battery cable from the motherboard by gently pulling out on the black part of the cable closest to the white tab.
-
-
-
Remove two 6mm screws on each speaker with the PH0 screwdriver.
-
-
-
Disconnect the black cable that attaches the speakers to the motherboard by gently pulling the cable outward.
-
Remove the speakers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 19-9, Maness Winter 2015 crwdns2935289:0Cal Poly, Team 19-9, Maness Winter 2015crwdne2935289:0
CPSU-MANESS-W15S19G9
crwdns2931471:04crwdne2931471:0
crwdns2935297:012crwdne2935297:0
