crwdns2915892:0crwdne2915892:0
This guide provides instructions to replace the AC power adapter on an unresponsive HP Officejet Pro 6230 Printer. Even though this is an older model printer, it is wireless: this makes it a perfect candidate for iFixit because most people would throw away an old model printer when it's dead, but since it is wireless, it still has the potential to be used alongside new technology. Because of its age, there are not many online guides to help with repairs.
crwdns2942213:0crwdne2942213:0
-
-
Turn the printer around and locate the back panel for power.
-
-
-
Unscrew the 0.8 mm screw holding in the panel using a T6 Torx screwdriver.
-
-
-
-
Remove the HP AC Power Adapter from the slot.
-
-
-
Locate the blue/green/red wire attached to the back of the adapter.
-
-
-
Unplug the current adapter from the wire.
-
-
-
Affix the new adapter to the same wire.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.