crwdns2915892:0crwdne2915892:0
This Guide will demonstrate how to replace the Wi-Fi card in an HP Envy x360 15m-cn0011dx laptop.
Make sure your device is fully powered of before attempting this guide.
crwdns2942213:0crwdne2942213:0
-
-
Flip the laptop over to the back side.
-
-
-
Remove the six 5.6 mm screws from the back cover using a Phillips #00 screwdriver.
-
Remove the single 4.3 mm screw in the bottom middle section of the back cover using a T5 Torx screwdriver.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Disconnect the pins from the Wi-Fi adapter card using a pair of tweezers.
-
-
-
Remove the single 2.3 mm screw from the Wi-Fi card using a Phillips #00 screwdriver.
-
-
-
Lift the adapter up and pull it out in an upward angle.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.