crwdns2942213:0crwdne2942213:0
-
-
Place the computer on its top on a flat surface with the hinges facing away from you.
-
-
-
Slide the battery release latch to the left which is located on the right-hand side of the battery.
-
-
-
Tilt the battery away from you and lift out.
-
-
-
-
Using a Phillips #01 screwdriver, remove the Phillips PM2.5×5.5 screw on the service cover.
-
-
-
Slide the service cover toward the front of the laptop.
-
Lift the service cover to remove it from the laptop.
-
-
-
Press down and away from the ram cards on the tabs surrounding the ram cards.
-
-
-
The first ram card will pop up, and now you will slide it out of its slot.
-
-
-
Repeat this process for the second ram card.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.