crwdns2915892:0crwdne2915892:0
This guide will explain how to remove and replace the wifi card in the HP Envy X2-15-C001Dx. Your wifi card may need to be replaced if it is nonfunctioning or having connectivity issues. Replacing the wifi card will solve any wifi related issues. In order to complete this task, you will need to have a Phillips head screwdriver and know how to use it.
crwdns2942213:0crwdne2942213:0
-
-
Place the laptop face down on a table.
-
-
-
Remove the five screws from the bottom of the back plate using a Phillips #1 screwdriver.
-
-
-
Remove four screws from the back stand hinges using a Phillips #1 screwdriver.
-
-
-
Remove the hinges and the back stand from the laptop.
-
-
-
-
Use a spudger to remove the thin panel where the back stand was.
-
-
-
Remove the screws from the back panel using a Phillips #1 screwdriver.
-
-
-
Remove two side screws using a Phillips #1 screwdriver.
-
-
-
Pry apart the base from the screen by going around the entire perimeter with an opening tool.
-
-
-
Remove the back panel from the laptop.
-
-
-
Remove the screw holding the Wi-Fi card using a Phillips #1 screwdriver.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Disconnect the white coaxial cable connected to the Wi-Fi card using a pair of tweezers.
-
-
-
Disconnect the black coaxial cable connected to the Wi-Fi card using a pair of tweezers.
-
-
-
Pull out the Wi-Fi card out of its slot to remove it from the laptop.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
UMass Dartmouth, Team 2-6, Sinclaire Fall 2021 crwdns2935289:0UMass Dartmouth, Team 2-6, Sinclaire Fall 2021crwdne2935289:0
UMASSD-SINCLAIRE-F21S2G6
crwdns2931471:03crwdne2931471:0
crwdns2935297:06crwdne2935297:0
