crwdns2915892:0crwdne2915892:0
This guide will teach you how to repair or replace the cooling fan in the HP Envy Ultrabook 4-1015dx. This process is also a prerequisite for replacing the keyboard.
crwdns2942213:0crwdne2942213:0
-
-
Make sure that the device is turned off and that all external devices are removed.
-
-
-
Flip the device over so that the back plate is facing upwards.
-
-
-
Using a small (size 0) Phillips head screwdriver, remove the twelve 5.5 mm external Phillips head screws that connect the back plate to the device.
-
-
-
Using the plastic opening tool, gently pry off the back plate from the device.
-
-
-
Move the ribbon cable so that it is no longer on top of the battery.
-
-
-
-
Using a small (size 0) Phillips head screwdriver, remove the three 3.5 mm Phillips head internal screws that hold the battery in place.
-
-
-
Lift up the battery and remove it from the slot as shown.
-
-
-
Use the plastic opening tool to disconnect the battery cable.
-
-
-
Lift up the battery and remove it from the device.
-
-
-
Remove the screws that secure the top cover of the fan.
-
-
-
Lift the fan up and remove it gently.
-
-
-
Remove the fan cable with the plastic opening tool.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0