crwdns2915892:0crwdne2915892:0
This guide will help you in replacing the touchpad on your HP Envy Sleekbook m6-k010dx. Make sure to turn the device off before doing anything.
crwdns2942213:0crwdne2942213:0
-
-
Remove the twelve 9 mm Phillips #00 screws.
-
-
-
Use the plastic opening tool and your hands to remove the bottom cover.
-
-
-
Disconnect the battery power cable from the motherboard.
-
-
-
-
Remove the six 6 mm Phillips #00 screws from the battery.
-
-
-
Lift the white tab on the ZIF connector to unlock the ribbon cable.
-
Pull the ribbon cable out of the ZIF connector.
-
-
-
Remove the seven 3mm Phillips #00 screws from the trackpad.
-
-
-
Use the plastic opening tool to lift the touchpad up and pull out to remove.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.