crwdns2915892:0crwdne2915892:0
Use this guide to give a new lease on life to your HP device by replacing the battery. If the battery does not charge past a low level or shuts down unexpectedly, it may be time to replace it. This guide provides detailed instructions for removing the battery from your device.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew and remove the one 7.5 mm Phillips-head screw using Phillips #1 screwdriver.
-
-
-
Unscrew twelve 6.0 mm Phillips-head screws using Phillips #1 screwdriver.
-
-
-
-
Use the plastic opening tool (which is short and has a thin end for prying open device parts) to pry open the back case of the device.
-
-
-
Once the device is open, move the ribbon cable to the side.
-
-
-
Use the flat end of a plastic spudger to disconnect the battery cable from its socket in the motherboard.
-
-
-
Unscrew and remove the three 4.0 mm Phillips-head screws that hold the battery in place, using a Phillips #1 screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2947410:01crwdne2947410:0
Worked very well, many thanks