crwdns2915892:0crwdne2915892:0
This guide is a necessary first step to many of the other guides for this laptop.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two no-slip covers on the rear, bottom side using spudger shown in top center of picture.
-
-
-
Remove the two cover tabs towards center of the bottom as there are screws underneath them.
-
-
-
-
Remove all fourteen 4.5 mm screws from the bottom using a Phillips #0 screwdriver. Each location is marked by a red circle in the picture.
-
-
-
Separate the top cover by using a spudger to go around the sides freeing the inside latches.
-
-
-
Use the spudger to detach the two ribbons from their connectors.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.