crwdns2915892:0crwdne2915892:0
Use this guide to replace the speakers in your HP ElitePad 900.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew the two 2.8mm Phillips #000 screws near the power connector.
-
-
-
Use a suction cup to pull the display assembly up.
-
-
-
Use the tip of a spudger to disconnect the two display ZIF connectors.
-
-
-
-
Remove the eight 2.4mm Phillips #000 screws.
-
-
-
Gently use tweezers to disconnect the indicator wire.
-
-
-
Lift the charging port over the left speaker.
-
-
-
Slightly lift the green PCB to slide out the right speaker.
-
Replace the speakers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.