crwdns2915892:0crwdne2915892:0
Use this guide to replace the LCD on your HP ElitePad 900.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew the two 2.8mm Phillips #000 screws near the power connector.
-
-
-
Use a suction cup to pull the display assembly up.
-
-
-
-
Use the tip of a spudger to disconnect the two display ZIF connectors.
-
-
-
Remove the four 1.6mm Phillips #000 screws securing the LCD to the digitizer.
-
-
-
Use the tip of a spudger to disconnect the ribbon cable ZIF connector.
-
-
-
Use a plastic opening tool to separate the LCD from the digitizer.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0