crwdns2915892:0crwdne2915892:0
Use this guide to replace the hard drive on the HP Elitebook 1040 G4. The solid-state drive (SSD) is a storage component of the computer which and saves programs. It is a long term storage device and may need to be replaced or removed. There are typically 3 common reasons you would need to remove a hard drive: (1) if the hard drive fails, (2) need more storage, or (3) need a speed boost. Before beginning, be sure to completely power off your computer.
To complete this guide, you will need a #T5 Torx head screwdriver and a Phillips #00 screwdriver.
crwdns2942213:0crwdne2942213:0
-
-
Use a T5 Torx screwdriver to remove the eight 5 mm screws securing the back cover to the chassis.
-
-
-
Lift the back cover up and off the device.
-
-
-
-
Using the Phillips #00 screwdriver, remove the single 5 mm screw securing the SSD to the motherboard.
-
-
-
Lift the SSD up and out of the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Clemson, Team 4-1, Hunter Fall 2021 crwdns2935289:0Clemson, Team 4-1, Hunter Fall 2021crwdne2935289:0
CLEM-HUNTER-F21S4G1
crwdns2931471:05crwdne2931471:0
crwdns2935297:010crwdne2935297:0
