crwdns2915892:0crwdne2915892:0
RAM, or random access memory, is short-term storage for your Compaq dx2000MT. RAM is used by your processor for immediate use as-needed, unlike long-term files written to a hard disk drive. If your computer has slowed considerably or you’re looking for a boost, replacing/upgrading the RAM is a fairly simple and inexpensive first step. The Compaq dx2000MT laptop comes standard with 4GB of RAM and can be upgraded to a maximum of 8GB with its two (DDRSD) slots.
crwdns2942213:0crwdne2942213:0
-
-
Turn off your computer and remove the power cable by pulling it straight out of its socket.
-
-
-
Remove the two Phillips #2 screws that secure the case door to the device.
-
-
-
Remove the side case door by pushing towards the rear of the device with your hand.
-
Once you slide the door back, remove it by pulling it outwards from the device.
-
-
-
Remove the side case door by pushing towards the rear of the device with your hand.
-
Once you slide the door back, remove it by pulling it outwards from the device.
-
-
-
Remove the IDE data and power cables from the hard drive.
-
-
-
-
Remove the front bezel by pulling upwards and out from below the lowest air vent.
-
-
-
Remove the external drive faceplate by removing the two Torx T15 screws.
-
-
-
Remove the following screws:
-
Front Torx T15.
-
Torx T15 mounting the hard drive cage to the optical drive bay.
-
-
-
Fully remove the hard drive cage by sliding it towards the back of the device and pulling down.
-
-
-
Remove the two Torx T15 screws holding this side of the hard drive in place.
-
-
-
Proceed to the other side of the hard drive cage.
-
Remove the two Torx T15 screws holding this side of the hard drive in place.
-
-
-
Remove the hard drive from the hard drive cage by pulling it outward from the cage.
-
-
-
Release the lower portion of the RAM by pushing down on the bottom tab.
-
-
-
Release the upper portion of the RAM by pushing down on the upper tab.
-
-
-
Remove the RAM by pulling it out towards the side of the device
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0