crwdns2915892:0crwdne2915892:0
A guide to upgrading the RAM in the HP Compaq Pro 6300.
-
-
Grab the handle and pull, then lift the cover off.
-
-
-
Grab the tab and pull up the DVD drive to access the RAM.
-
-
-
-
Put your thumbs on the two tabs surrounding the RAM sticks and push down.
-
If you need more room, you can unplug the SATA cables that connect the hard drive and DVD drive to the computer- just make sure you plug them back in when you finish.
-
Pull the module out by the top or the sides. Take care not to touch the delicate pins at the bottom and the chips on the surface.
-
-
-
Insert the new module, lining the notch on the module with the notch in the slot.
-
Push down on the module until you hear both tabs lock into the notches.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.