crwdns2915892:0crwdne2915892:0
This guide will assist you in successfully replacing the HP Chromebook 14-x013dx Screen. This requires the removal of the bezel around the screen, as well as 4 screws and the connection to the motherboard. Some of the removed parts have adhesive on them which may need to be reapplied.
Note: The replacement of the screen does not require any prior disassembly of the laptop.
crwdns2942213:0crwdne2942213:0
-
-
Remove lower left and right nylon flaps on the screen to remove the screws located underneath them.
-
Remove the two 2mm screws holding the bezel to the laptop case.
-
-
-
Gently pry around the edges of the display using a spudger to remove the bezel that borders the screen.
-
-
-
-
Remove glued plastic at the bottom of the cover.
-
-
-
Once glue is separated, pop out the front cover by pulling upwards on the hinge.
-
-
-
Once the bezel has been removed, remove the four 5mm screws at the corners of the screen using a PH00 screwdriver.
-
-
-
Before completely removing the screen, detach the connected located at the bottom of the screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team S3-G6, Nance Fall 2017 crwdns2935289:0USF Tampa, Team S3-G6, Nance Fall 2017crwdne2935289:0
USFT-NANCE-F17S3G6
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
