crwdns2942213:0crwdne2942213:0
-
-
Starting with the laptop on its back, remove the 13 screws holding the keyboard in place with a P00 screwdriver (2 screws are hidden behind the rubber footers)
-
Open the screen, revealing the keyboard. Using a prying tool, 'pop' the keyboard out by sliding the tool around the edge
-
-
-
Gently raise the keyboard from the body, careful not to rip out the ribbons
-
With light pressure, flip the black bar holding the ribbons in place, and remove the ribbons from the body
-
-
-
-
Completely remove the keyboard, place away from the body of the laptop
-
-
-
With a P00 Screwdriver, remove the 9 screws holding the battery in place
-
Gently pry the cable connecting the battery to the motherboard off
-
Battery will lift away from the body (screen will now be heavier than the body, be careful not to drop it)
-
-
-
Gently disconnect the cable connecting the internal speaker to the motherboard
-
Using a P00 Screwdriver, remove the final screw from the left speaker
-
Using a prying tool, carefully remove the speaker out of the body
-
-
-
With a P00 Screwdriver, remove the final screw from the right speaker
-
Carefully remove the right internal speaker from the body
-
The entire speaker (barring some tape you may need to remove) should lift away from the body of the laptop
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
