crwdns2915892:0crwdne2915892:0
This guide will require removal of 1x3mm screws on the bluetooth and wireless card.
crwdns2942213:0crwdne2942213:0
-
-
Flip the laptop so the base of the laptop is facing you.
-
Using the #00 screwdriver, unscrew the 13 screws.
-
-
-
Start from the top right corner of the laptop and work clockwise with an iFixit opening tool or spudger to pry the keyboard from the frame of the laptop.
-
-
-
Gently pull the keyboard in the opposite direction of the screen, so the wires beneath are exposed.
-
Lift the black flap and pull the blue ribbon gently towards you until it is disconnected.
-
Lift the white flap and pull the blue ribbon towards you until it is disconnected.
-
-
-
-
Lift keyboard slightly and remove the strip gently to prevent damaging any parts.
-
-
-
Using a spudger, remove the white and black cables from the card.
-
-
-
Gently pull card at a 45° angle to remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0