crwdns2915892:0crwdne2915892:0
If you find yourself needing to replace your HP Beats Special Edition 15-p390nr fans, use this guide to help you go through the process successfully.
crwdns2942213:0crwdne2942213:0
-
-
Turn computer over and begin removing noticeable 8mm screws with a Phillips #0 screwdriver.
-
-
-
Simply use a metal spudger to pop off the screw cover to unveil the hidden 8mm screw.
-
-
-
Once screws are removed you may now remove the optical drive.
-
Remove the hidden 3mm screw in the optical drive port.
-
-
-
Remove the rubberized feet located on the left and right shoulder of the computer to uncover hidden 8mm screws.
-
The shoulder caps are removable. Underneath there are 2 additional screws.
-
-
-
Flip computer over and wedge metal spudger along the computer to pop off keyboard panel
-
-
-
-
Unclip wires connected to the motherboard and remove keyboard from the device.
-
-
-
Remove screws from the motherboard.
-
-
-
Unclamp wire strips from motherboard.
-
-
-
Detach by lifting the motherboard up and flip the motherboard over.
-
-
-
Unclip wifi card for further procedures
-
-
-
Remove the fan cable from the connector that connects to the motherboard.
-
-
-
Remove all three screws that hold the fan to the system board
-
-
-
Lift and remove the fan from the top cover.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.