crwdns2915892:0crwdne2915892:0
This guide is helpful if you need to replace a dead or damaged battery. Be careful when removing the battery to not bend or puncture it because it may contain hazardous chemicals.
crwdns2942213:0crwdne2942213:0
-
-
Using a Torx T4 screwdriver, remove the four 5 mm screws on the back panel.
-
-
-
Insert the tip of a plastic opening tool in the seam between the front and back panels.
-
-
-
-
Slide the plastic opening tool around all edges of the device until the back panel detaches.
-
Lift off the back panel.
-
-
-
Using a spudger or your fingers, disconnect the power cable by sliding the connector out of the socket on the motherboard.
-
-
-
Using a plastic card or a nylon spudger, carefully pry the battery from the adhesive on the tablet.
-
-
-
Once the battery is removed the battery and tablet should look like this.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
University of Alabama, Team S1-G1, Bedsole Spring 2019 crwdns2935289:0University of Alabama, Team S1-G1, Bedsole Spring 2019crwdne2935289:0
UA-BEDSOLE-S19S1G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
