crwdns2915892:0crwdne2915892:0
This guide explains how to replace the bottom panel of the HP 15-dy2072dx in case of warping, cracks, and any general wear and tear.
The bottom panel is responsible for covering most internal parts such as the battery, hard drive, memory, and the motherboard. The panel has the device information printed onto it such as the model number.
The panel usually comes equipped with two strips of rubber to allow for the laptop to rest on a hard surface. This is not always the case with secondhand panels.
crwdns2942213:0crwdne2942213:0
-
-
Remove both of the rubber strips to uncover the hidden screws.
-
-
-
Unscrew all 8 Phillips #1 screws on the bottom panel:
-
Two M2.5x6
-
Six M2x6
-
-
-
-
Flip the laptop over and open the lid.
-
Separate the bottom panel from the main body by using the iFixit opening tool.
-
-
-
Close the laptop to allow the back edges to fully separate
-
-
-
Flip the laptop over and carefully remove the lower case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0