crwdns2915892:0crwdne2915892:0
This is a guide for replacing the screen for the HP 15-bs051od. Possible reasons to replace the screen include the computer screen is unresponsive, and/or looks frozen.
Note: Our model does not include a battery. Before performing any repair ensure the battery has been removed and the computer is not connected to a power source. It is also important to ground yourself by touching metal to discharge excess electricity before beginning the repair.
crwdns2942213:0crwdne2942213:0
-
-
Start with the laptop face down.
-
Remove the eight 6 mm Phillips head screws securing the lower case.
-
-
-
Use the opening tool to pry the lower case away from the body of the laptop.
-
Remove the lower case.
-
-
-
Pull the RAM-retaining arms away from the RAM chip.
-
-
-
Remove the four (4 mm) Phillips screws on the heatsink.
-
Remove the exhaust by carefully lifting it up.
-
-
-
Disconnect the connecting cable of the fan and remove the fan.
-
-
-
Pull the red, white, black, and blue cable directly out of its port.
-
-
-
-
Pull the black and red cable connecting both speakers out of its secure fastening.
-
-
-
Pull the right speaker out by sliding from left to right.
-
-
-
Locate the motherboard.
-
Locate the six ribbon cables.
-
-
-
Flip up the ZIF lock bars that keep the six ribbon cables in place.
-
Slide the rest of the ribbon cables out of their fastenings.
-
-
-
Remove the four (4 mm) Phillips screws securing the motherboard.
-
-
-
Remove the single (4 mm) Phillips screw on the Wi-Fi card.
-
Slide the Wi-Fi card out of its port.
-
-
-
Remove the following Phillips screws:
-
Five 7 mm screws on the display hinge.
-
One 3 mm screw.
-
-
-
Partially open the laptop and remove the base.
-
-
-
Use the opening tool to carefully separate the screen cover from the screen.
-
-
-
Remove the following Phillips screws:
-
Two 4 mm screws from the top of the screen.
-
Two 4 mm from the bottom of the screen.
-
-
-
Carefully lift the screen from the display assembly without disconnecting the display cable.
-
-
-
Remove the display cable from the back of the screen.
-
-
-
Remove the screen from the display assembly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.