crwdns2915892:0crwdne2915892:0
The speakers are attached to the device on the left and right edges. In this guide, you will unscrew and desolder the speakers to disconnect them from the motherboard and the device. This guide requires soldering, please be careful and ventilate the room.
crwdns2942213:0crwdne2942213:0
-
-
Identify the SD card port.
-
-
-
Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.
-
-
-
Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.
-
-
-
-
Separate the back panel from the rest of the device.
-
-
-
Remove the pieces of black tape that hold the speaker wires to the battery.
-
-
-
Use the Phillips #00 screwdriver to remove the 4mm screws from the speaker.
-
There are two screws holding both speakers to the plastic device frame.
-
-
-
Desolder the speaker wires from the motherboard.
-
-
-
Separate the speakers from the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Central Washington University, Team S1-G4, Pengilly Fall 2018 crwdns2935289:0Central Washington University, Team S1-G4, Pengilly Fall 2018crwdne2935289:0
CWU-PENGILLY-F18S1G4
crwdns2931471:04crwdne2931471:0
crwdns2935297:010crwdne2935297:0
