crwdns2915892:0crwdne2915892:0
The microphone is soldered into the motherboard. This guide requires a knowledge of soldering. The back panel must be removed to access the microphone.
crwdns2942213:0crwdne2942213:0
-
-
Identify the SD card port.
-
-
-
Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.
-
-
-
-
Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.
-
-
-
Separate the back panel from the rest of the device.
-
-
-
Desolder the microphone wires from the motherboard.
-
-
-
Separate the microphone from the rest of the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.