crwdns2915892:0crwdne2915892:0
If the fork arm in The Buttonholer is not moving properly while being operated, chance are you need to replace the spring holding the arm.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew the screw located underneath fork arm using a Flathead screwdriver.
-
-
-
-
Raise the fork arm so that it is parallel with the upper hook.
-
Turn the lower hook towards you from the bottom, and remove.
-
-
-
Remove the old spring from the hook.
-
Add the new spring to the hook.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
Will the spring look distorted if it needs replacing?