crwdns2915892:0crwdne2915892:0
This replacement guide demonstrates the steps required to replace a cracked, damaged, or otherwise inoperable rear-facing camera in your Google Pixel Slate.
The rear-facing camera is used to take photos from the back of your device. It may become inoperable for a number of reasons including factory defect. Before replacing, first try resetting your device. If the problem remains the same, continue with the replacement.
Replacing the rear-facing camera requires no special skills. Each of the steps is in this guide is accompanied by a brief description and photos demonstrating what you will need to do.
crwdns2942213:0crwdne2942213:0
-
-
Orient the Google Pixel Slate so that the screen is facing upwards.
-
Use the iFixit opening tool to separate screen from main body.
-
Use the suction cup to remove the screen from the body of the device.
-
-
-
Gently disconnect the three flat-wires from the screen.
-
Carefully separate and remove the screen from the body of the device.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Use a T2 Torx screwdriver to remove the two black 2mm screws holding down the square plate.
-
Use the Nylon Tipped Tweezers to lift the metal plate.
-
-
-
Use a T3 Torx screwdriver to remove the two yellow and grey 3mm screws from the L-shaped plate.
-
Use the Nylon Tipped Tweezers to lift the plate from the device.
-
-
-
Gently pull upwards to remove the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team S2-G5, Maness Spring 2019 crwdns2935289:0Cal Poly, Team S2-G5, Maness Spring 2019crwdne2935289:0
CPSU-MANESS-S19S2G5
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
