crwdns2915892:0crwdne2915892:0
This guide shows how to install the camera bezel on the back cover for you Google Pixel 9a smartphone.
crwdns2942213:0crwdne2942213:0
-
-
Use a spudger to scrape up and remove any of the old adhesive from the camera bezel and its corresponding spot on the rear cover.
-
-
-
Use high-concentration (>90%) isopropyl alcohol and a lint‑free cloth (or coffee filter) to clean up and remove any adhesive residue from the camera bezel and its corresponding spot on the rear cover.
-
-
-
-
Remove the large, clear liner from the camera bezel adhesive.
-
Put the adhesive over the top of the camera bezel and set it in place.
-
-
-
Use a spudger to firmly press around the perimeter of the camera bezel to secure the adhesive.
-
Remove the second, colored liner from the camera bezel adhesive.
-
-
-
Align the camera bezel such that the square foam is closest to the edge.
-
Use your fingers to press the camera bezel into place on the rear cover, squeezing firmly around the perimeter to secure it with the adhesive.
-
