crwdns2915892:0crwdne2915892:0
This guide will show how to remove, disassemble, and replace the chainrings from the crank arm on a Giant Talon 29er bicycle. The chainrings should be replaced when the chain starts to skip teeth while riding.
crwdns2942213:0crwdne2942213:0
-
-
Push the chain tensioner towards the front of the bicycle to release the tension on the chain.
-
Unroute the chain from the chainrings.
-
-
-
Remove the 8 mm Hex screw from the crank arm.
-
-
-
-
Remove the crank arm and chainrings by pulling the crank arm away from the bicycle frame.
-
-
-
Remove the four 5 mm Hex screws that mount the crank arm to the chainrings.
-
-
-
Rotate the largest chainring 45 degrees in either direction.
-
Remove the crank arm from the chainrings.
-
Reassemble your bicycle with the new chainrings by following these instructions in reverse order.
Reassemble your bicycle with the new chainrings by following these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Michigan Tech, Team 1-7, Lauer Spring 2016 crwdns2935289:0Michigan Tech, Team 1-7, Lauer Spring 2016crwdne2935289:0
MTU-LAUER-S16S1G7
crwdns2934841:01crwdne2934841:0
crwdns2935303:01crwdne2935303:0
