crwdns2942213:0crwdne2942213:0
-
-
Remove all of the control knobs.
-
-
-
Remove the two 19 mm screws below the control knob panel using a Phillips #3 screwdriver.
-
-
-
Push up on the front panel, and pull it up above the grill.
-
-
-
Disconnect the cables from the ignitor.
-
-
-
-
Pinch the two ends of the ignitor and remove the ignitor from the front panel.
-
-
-
Put the new ignitor into the socket.
-
Press down evenly until it is secure.
-
-
-
Connect the white cables to the ignitor.
-
-
-
Make sure any and all cables are separated from the fire box (the bottom of the grill).
-
Slot the panel back on the grill and then push downward.
-
-
-
Make sure the holes match and reinsert the screws from Step 2 using a Phillips #3 screwdriver.
-
-
-
Add the control knobs, and slot them into place.
-
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0