crwdns2915892:0crwdne2915892:0
This device can be identified utilizing the criterion on the device page. When replacing the motherboard, be sure to set aside the following tools: T5 Torx screwdriver, PH #0 screwdriver, and plastic opening tool.
crwdns2942213:0crwdne2942213:0
-
-
Carefully remove model/serial number sticker.
-
-
-
Remove two 4mm T5 Torx screws located under the sticker.
-
-
-
-
Once screws are removed, use the plastic opening tool to carefully separate the body from the screen encasing.
-
-
-
Once the body of the nüvi is separated, carefully flip the tabs on the motherboard that secure the ribbon cable to the motherboard and disconnect.
-
-
-
Once the body of the nüvi is separated and the ribbon cable is disconnected, remove the three 1.6mm Phillips #0 screws.
-
-
-
Carefully disconnect the two cables connecting the battery to the motherboard and remove motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
IUPUI, Team S3-G5, Harley Spring 2018 crwdns2935289:0IUPUI, Team S3-G5, Harley Spring 2018crwdne2935289:0
IUPUI-HARLEY-S18S3G5
crwdns2931471:03crwdne2931471:0
crwdns2935297:02crwdne2935297:0
