crwdns2915892:0crwdne2915892:0
If your speaker is defective, obtain a new speaker and replace the old one with the new working speaker.
crwdns2942213:0crwdne2942213:0
-
-
Remove the barcode sticker at the bottom of the device.
-
-
-
Remove two 8.4 mm T5 screws from the bottom of the device.
-
-
-
Using a plastic opening tool, carefully pry open the device.
-
-
-
-
Unscrew the four 6.70 mm screws holding the motherboard in place using a philips #0 screw driver.
-
-
-
Lift up the motherboard.
-
Carefully disconnect the battery and motherboard. Slowly wiggling the connection makes it easier to disconnect the battery from the motherboard.
-
-
-
Using the plastic opening tool as a wedge, pry the battery from the case. This can be fairly tough as the battery is glued to the case. Don't be afraid to use force and some good leverage.
-
-
-
Carefully disconnect the speaker from the motherboard. Slowly wiggling the connection makes it easier to disconnect.
-
-
-
Using a plastic opening tool, wedge the speaker away from the device. The speaker is glued to the case so use force and leverage.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.