crwdns2915892:0crwdne2915892:0
The 735XT uses a standard 20mm watch strap, you don't need to buy a Garmin branded one if you don't want.
crwdns2942213:0crwdne2942213:0
-
-
Using two T6 screwdrivers, remove the old strap.
-
Turn the right hand screw anti-clockwise. This is the shorter of the two.
-
Two screwdrivers are needed to hold one screw in place while you turn the other one.
-
-
-
-
With the small screw removed, you can use one of the screwdrivers to push out the long bar securing the strap.
-
Repeat this step for the other half of the strap.
-
-
-
With both of the old straps off, you can now fit the new one.
-
Slide the long bar through the watch and the strap, then attach the small screw back into it.
-
You will need to use both screwdrivers again (one to hold a screw in place, the other to turn.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
