crwdns2915892:0crwdne2915892:0
This guide will walk you through the process of replacing a button on the Forerunner 405.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew the four 6.35 mm Torx T5 screws securing the backing of the watch.
-
-
-
Pull the backing off the watch.
-
-
-
-
Pull the battery wires out from the motherboard slowly.
-
-
-
Unscrew one 4 mm philips screw that attaches the motherboard using a PH000 screwdriver.
-
Lift the motherboard out of the watch.
-
-
-
Push button in and pinch silver clip with tweezers.
-
Pull silver clip off the pin it is on.
-
Pull out button and replace.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
USF Sarasota-Manatee, Team 1-4, Stewart Fall 2014 crwdns2935289:0USF Sarasota-Manatee, Team 1-4, Stewart Fall 2014crwdne2935289:0
USFSM-STEWART-F14S1G4
crwdns2931471:04crwdne2931471:0
crwdns2935297:019crwdne2935297:0
crwdns2944067:02crwdne2944067:0
Where to find repair button for FR60? Can it be 3d printed? Garmin asks too much out-of-warranty
I took mine apart to find that the jammed button was actually bent. Using two pairs of needle-nose pliers, I was able to straighten it and re-use it. The watch works great now.
