crwdns2915892:0crwdne2915892:0
If your GPS is failing to find your location, lags, or performs oddly, you can use this guide to locate and replace the antenna, which is located inside the watch. To do this, you will need a T6 Torx screwdriver and a spudger. Tweezers are best used for extracting the GPS antenna.
crwdns2942213:0crwdne2942213:0
-
-
Use a T6 screwdriver to remove the five 1.7 mm screws from the watch face.
-
-
-
Carefully lift the face off the watch base.
-
-
-
-
Use a spudger to lift up and free the screen ribbon cable's press-fit connector from the motherboard.
-
-
-
Set the watch face aside.
Hi can i replace only lcd because my sapphire glass is ok
-
-
-
Locate the antenna, which is located on the motherboard.
-
-
-
Carefully remove the antenna, and set it aside.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2947412:08crwdne2947412:0
Hi, where did you get a replacement Antenna?`I have a Fenix 3 with no GPS reception at all..
Regards, Nico
Same as you…
X PuyA -
Hi, where did you get a replacement Antenna? I have a Fenix 3 with no GPS reception at all..
Regards, Dusan
Hi did you find gps antenna
Could you please add a link where to buy the antenna?
Bonjour, Idem, après plusieurs semaines de recherche pourquoi mon GPS ne fonctionne plus j'ai voulu changer cette pièce mais je ne la trouve pas !
Indeed where can I but a Gps antenna for Fenix 3hr?
Has anyone managed to find a source for a Fenix gps antenna? thanks in advance for any help