crwdns2942213:0crwdne2942213:0
- 
   
   - 
                     
            Rotate the Dash Cam to where the socket faces you. 
- 
                     
            Remove the 9 mm screw using the Torx T6 screwdriver. 
 
- 
                     
            
- 
   
   - 
                     
            Rotate the Dash Cam to where the product information faces you. 
- 
                     
            Remove the two 5 mm screws using the Torx T5 screwdriver. 
 
- 
                     
            
- 
   
   - 
                     
            Remove top case from the bottom case. 
 
- 
                     
            
- 
                     
                                                
- 
   
   - 
                     
            Remove the two 5mm screws using the Torx T5 screwdriver 
 
- 
                     
            
- 
   
   - 
                     
            Use the nylon spudger to pry the corner of the case off of the motherboard. 
 
- 
                     
            
- 
   
   - 
                     
            Remove the metal case off of the motherboard. 
 
- 
                     
            
- 
   
   - 
                     
            Remove the three 5 mm screws using the Torx T5 screwdriver. 
 
- 
                     
            
- 
   
   crwdns2935267:0crwdne2935267:0Tweezers$4.99- 
                     
            Use tweezers to remove the connector on the top right of the motherboard. 
 
- 
                     
            
- 
   
   - 
                     
            Remove the motherboard from the case and flip to reveal SD connection. 
- 
                     
            Use tweezers to remove the connector next to the SD card slot. 
 
- 
                     
            
- 
   
   - 
                     
            The motherboard is now removed aside from the copper strip and its connector. 
- 
                     
            Disconnect from the front case and the copper strip. 
 
- 
                     
            
- 
   
   - 
                     
            Use the Torx T5 screwdriver to remove the two 5mm screws. 
 
- 
                     
            
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
