crwdns2915892:0crwdne2915892:0
This guide will walk users through removing the Dash Cam's casing revealing the internal components, allowing access to rechargeable battery.
crwdns2942213:0crwdne2942213:0
-
-
Rotate the Dash Cam to where the socket faces you.
-
Remove the 9 mm screw using the Torx T6 screwdriver.
-
-
-
-
Rotate the Dash Cam to where the product information faces you.
-
Remove the two 5 mm screws using the Torx T5 screwdriver.
-
-
-
Remove top case from the bottom case.
-
-
-
Remove the two 5mm screws using the Torx T5 screwdriver
-
-
-
Remove the green tape overlying the pin connector with tweezers.
-
Remove the pin connector using tweezers.
-
-
-
With the the nylon spudger, lift the battery to expose and stretch the glue. Cut the glue residue by gliding the tool from left to right.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2944067:03crwdne2944067:0
An excellent article except for one major problem but, why does iFixIt not sell theses batteries or direct you on where a person could actually buy one? This knowledge is pretty much useless with out a replacement battery to actually use.
Yeah I agree
Thanks for this guide. This gave my Garmin 20 another couple of years! :)
BTW, I was able to buy the battery replacement from Amazon: https://www.amazon.com/gp/product/B07KSR...