crwdns2915892:0crwdne2915892:0
If you need to open or replace the back cover of the GameSir X2 Type-C, use this guide. This guide provides access to the left joystick and trigger assembly. This guide is a pre-requisite for most replacements inside the housing of the device.
crwdns2942213:0crwdne2942213:0
-
-
Turn the device so the back faces you.
-
-
-
Remove the eight 6 mm T6 Torx screws.
-
-
-
-
Use a straight edge to remove the rubber pad on the front of the device.
-
-
-
Remove the four 4.5 mm screws with a Phillips #000 screwdriver.
-
-
-
Use a straight edge to pry open the controller, following the seam on the controller.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0