crwdns2915892:0crwdne2915892:0
Use caution when going through with the procedure. This procedure involves doing operations near the motherboard of the device, which has many sensitive components.
crwdns2942213:0crwdne2942213:0
-
-
Use the Phillips PH00 screwdriver to remove all the 0.5mm screws on the side.
-
-
-
Use the Tri-point Y0 screwdriver to remove the two 0.5mm screws on the horizontal axis.
-
Remove the other two 0.5mm screws on the bottom with the PH00 screwdriver.
-
-
-
Once you unscrew all of the screws, carefully remove the rear casing.
-
Detach the ribbon cable by lifting the tab on the connector.
-
-
-
-
Use a plastic opening tool to lift up the right side of the display screen.
-
-
-
Once the screen is out, you will realize that it is still connected to the ribbon cable. To unplug this ribbon cable, use a plastic opening tool to pull up and to the left on the ribbon cable connector and release the ribbon cable.
-
-
-
Using your PH00 screwdriver, unscrew the 0.5mm screw located on the bottom left hand corner where the display screen used to be.
-
-
-
Use the PH00 screwdriver to unscrew the 0.5mm screws located near the top left corner, top right corner, and bottom right corner.
-
-
-
Lift up the gray component where the display screen use to sit in.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 8-7, Banghart Winter 2017 crwdns2935289:0Cal Poly, Team 8-7, Banghart Winter 2017crwdne2935289:0
CPSU-BANGHART-W17S8G7
crwdns2931471:04crwdne2931471:0
crwdns2935297:010crwdne2935297:0
crwdns2917034:0crwdne2917034:0
Hi, any idea how i can get to the shutter button mechanism, it’s stopped working and I don’t want to break anything in my impatience to fix it :)
