crwdns2915892:0crwdne2915892:0
This guide shows how to remove the exterior case of the Fujifilm FinePix XP80 in order to access the interior and make other repairs or replacements.
crwdns2942213:0crwdne2942213:0
-
-
Using a Phillips PH000 bit, remove the five 2mm screws on the bottom of the camera.
-
-
-
Using a H1.3 hex head bit, remove the two 2mm screws from the top of the camera.
-
-
-
Using a H1.3 hex head bit, remove the two 2mm screws on the side of the camera.
-
-
-
-
Using a plastic opening tool, gently pry up the edge of the button case, located at the top of the camera, until it unclips.
-
-
-
Gently pry the side area of the case apart.
-
-
-
Continue using the opening tool on the bottom of the camera to gently pry the case apart.
-
-
-
Use the plastic opening tool to carefully pry the yellow front panel completely away from the camera.
-
Use your hands to take off the yellow back panel.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0