crwdns2942213:0crwdne2942213:0
-
-
Remove the screws from the lens cover
-
-
-
Remove the screws from the side metal cover of outer case.
-
-
-
Gently remove the Lens from the housing.
-
-
-
Use a screwdriver to remove the four screws from the top and bottom of the camera. Remove the screws securing the lanyard as well.
-
Use a T5 Torx bit to secure the exterior decorative cover of the device.
-
-
-
-
Use a plastic opening tool to detach the case.
-
-
-
Use the plastic opening tool to cautiously pry the casing off of the camera.
-
-
-
Carefully slide the case to the left. Avoid cracking the case on the lens.
-
-
-
Locate the securing tabs of the housing unit.
-
Using the spongerslowly work your way around the outside of the case using the sponging tool to pry open the case.
-
*** Take extreme caution when doing this being careful not to break the securing tabs of the housing.
-
-
-
Once the case is open locate the Ribbon cable attachment for the LCD screen.
-
Carefully ensure that the LCD screen is free from all attachments and any tape securing the ribbon cable is released.
-
-
-
Gently lift up on the black securing bar of the ribbon cable in order to free it from the units motherboard, thus releasing the LCD from the computer.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Pasco Hernando, Team 5-1, Prince Winter 2015 crwdns2935289:0Pasco Hernando, Team 5-1, Prince Winter 2015crwdne2935289:0
PHSC-PRINCE-W15S5G1
crwdns2931471:05crwdne2931471:0
crwdns2935297:010crwdne2935297:0
