crwdns2915892:0crwdne2915892:0
In this guide we will replace a Fujifilm FinePix S4200 motherboard.
The motherboard is a central part of any electrical system is connects all internal components and allows them to work together. When a motherboard fails It could cause many issues such as shutdowns, Connection errors, and reduced preformance.
You will need a Phillips #000 screwdriver and a Soldering Iron. Before using a Soldering Iron please consult the Soldering/desoldering connections guide.
crwdns2942213:0crwdne2942213:0
-
-
Turn off the camera by pushing the switch as shown.
-
-
-
Remove all the 4mm screws from the left, right, and bottom of the camera.
-
-
-
Remove casing part pictured by gently pulling up until casing is fully detached.
-
-
-
Remove the 4 mm screws on the metal plate. Then remove the 4 mm screws on left side of the camera, and remove the two 4mm screws on right side.
-
-
-
Remove the top casing by pulling upwards.
-
To remove orange tab gently pull on the tab until it is detached from the clamping device on the motherboard.
-
-
-
-
Carefully remove LCD screen.
-
Gently pull on orange tab until it is free.
-
-
-
Remove remaining 4mm screw.
-
Detach metal plate by lifting plate upwards.
-
-
-
Remove remaining orange tabs on motherboard. Gently pull on each orange tab until it is free. Make sure all tabs are free (check markers on image).
-
-
-
Remove the 4mm screws in the corners of the motherboard.
-
-
-
Use a soldering iron to melt the solder and disconnect the five connections shown.
-
-
-
Remove the motherboard. It should be free of all connections at this point and can be lifted with ease.
-
-
-
Replace the old motherboard with a new motherboard.
-
-
-
Reconnect the orange strips to their designated connections.
-
-
-
Resolder all the connections and wire onto the new motherboard
-
After given enough time and all the connections on new motherboard are secured, reassemble the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.