crwdns2915892:0crwdne2915892:0
This guide explains how to replace the old broken LCD screen.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew the four 4mm screws on the left-hand side of the camera with the JIS #1 screwdriver.
-
-
-
Unscrew the four 4mm screws on the right-hand side of the camera with the JIS #1 screwdriver.
-
-
-
Unscrew the three 4mm screws on the bottom of the camera with the JIS #1 screwdriver.
-
-
-
-
Take the plastic opening tool and place it in the space between the top of the screen and the top of the camera.
-
The cover will pop out.
-
-
-
Remove the three 2 mm screws from the back cover plate with the Phillips #000 screwdriver.
-
Gently lift the back cover away from the device.
-
-
-
Move the lever to disconnect the ribbon cable from the circuit board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.