crwdns2915892:0crwdne2915892:0
The Fugoo Style XL has two midwoofers connected to the casing that can be removed and replaced.
crwdns2942213:0crwdne2942213:0
-
-
Using your hand, unscrew the large screws underneath the speaker.
-
-
-
Using your hand, gently lift the large plastic tab secured to the rubber holding.
-
After lifting the tab, slide the speaker out of its case.
-
-
-
There are 8 screws (4 on each side) holding covers that conceal the bass speakers. Remove these 3mm screws using a #2.0 Hex screwdriver.
-
-
-
-
Using your hand, pull the covers away from the speaker.
-
-
-
Using a #2.0 Hex screwdriver to unscrew the 8 12mm screws depicted.
-
-
-
Gently pull apart the front casing from the back casing.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using a pair of tweezers or your hand, carefully remove the red bundled cable connectors from the motherboard.
-
When the red bundled cable connectors are disconnected, set the outer casing aside.
-
-
-
Carefully untangle and remove the white bundled cable connectors from the motherboard.
-
-
-
Using a T9 screwdriver, remove the 8 screws (4 on each speaker) surrounding the midwoofers.
-
Using your hand, carefully remove the midwoofers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
can anyone tell me where I can buy the replacement speaker