crwdns2915892:0crwdne2915892:0
The antenna wire could have come out and disconnected from the motherboard. Carefully connect the socket on the motherboard to the connector on the wire.
crwdns2942213:0crwdne2942213:0
-
-
On the back of the remote, locate the antenna box labeled in red.
-
-
-
Unplug the wire that connects the antenna box to the controller.
-
-
-
On either side of the box, squeeze the clips and pull up to release the antenna box away from its socket.
-
-
-
-
Unscrew the two 2.5 mm Phillips #1 screws with a screwdriver and carefully remove the front plate.
-
-
-
Once you remove it, you will see a wire that is connected to the antenna, and a motherboard.
-
-
-
Locate the brass colored socket and the end of the wire and carefully connect them together.
-
-
-
Once connected assemble the box back together.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
University of North Texas, Team 3-3, Saru Jimmy Spring 2023 crwdns2935289:0University of North Texas, Team 3-3, Saru Jimmy Spring 2023crwdne2935289:0
UNT-SARU JIMMY-S23S3G3
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
