crwdns2915892:0crwdne2915892:0
If your light is not turning on, then you most likely have a short circuit, which requires a replacement. This guide is specifically meant for incandescent light bulbs under a ceiling mount. It will demonstrate how to remove the broken bulb and replace it with a functional bulb. Make sure there is no current running through the light bulb to avoid electrocution before you begin.
crwdns2942213:0crwdne2942213:0
-
-
Turn off the electrical circuit breaker and the light switch.
-
-
-
Carefully pull the clip and remove the mount.
-
-
-
-
Unscrew the light bulb’s electrical foot contact from the socket.
-
-
-
Carefully screw the new light bulb into the socket.
-
-
-
Turn the light switch and the circuit breaker back on to check if the light bulb(s) are working before putting the mount cover back on.
-
-
-
Once the light bulb(s) are working, place one hand under the mount. Pull the clip back and let it settle in place.
-
If the lightbulb does not work after step 7, then you need to get a new lightbulb and repeat step 5-7. If it still does not work then your socket might need a replacement.
If the lightbulb does not work after step 7, then you need to get a new lightbulb and repeat step 5-7. If it still does not work then your socket might need a replacement.
crwdns2915084:0crwdne2915084:0
York University, Team N-4, Morris Winter 2023 crwdns2935289:0York University, Team N-4, Morris Winter 2023crwdne2935289:0
YORK-MORRIS-W23SNG4
crwdns2931471:03crwdne2931471:0
crwdns2935303:01crwdne2935303:0
