crwdns2915892:0crwdne2915892:0
Use this guide to remove the evaporator cover on your Whirlpool side‑by‑side refrigerator. This will give you access to the evaporator fan, the defrost heater and other items.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips screwdriver to unfasten:
-
The post screws
-
The bracket screws
-
The bin rail screws
-
Remove the posts, brackets, and rails.
-
-
-
Note that the mounting holes are square.
-
There is a very shallow boss on the back of those parts that corresponds to the square holes.
-
-
-
-
Use a Phillips screwdriver to unfasten the evaporator cover screws.
-
-
-
Lift the evaporator cover from the bottom edge to unfasten the two tabs near the top of the evaporator cover.
-
Pull the bottom edge of the evaporator cover outward and slightly downward toward you.
-
-
-
Continue to pull the bottom edge of the evaporator cover outward toward you.
-
Remove the evaporator cover.
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Ask our Answers community for help.
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Ask our Answers community for help.
